Epoxy-based Materials
grid
list
EPOMAX-STUCCO
Two-component, extra fine-grained epoxy putty
Two-component epoxy putty, extra fine-grained. Ideal for puttying any type of surfaces. Also used for bonding concrete, steel, stone, wood etc., as well as for restoring damages in concrete and screeds. For limited applications, i...
more...
EPOMAX-EK
Two-component epoxy putty
Two-component epoxy putty for bonding concrete and steel, repairing concrete, filling joints and sealing cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND.
more...
EPOMAX-MT
Three-component, high strength, pourable epoxy grout
Three-component, high strength, pourable non-shrink cast grout. Based on a two-component solvent-free epoxy resin and on specially selected quartz sand. It provides high initial and final strength, excellent bonding to steel and c...
more...
EPOMAX-CMT
Three-component thixotropic epoxy mortar for surface sealing
Three-component, solvent-free thixotropic mortar for surface sealing, based on cement and epoxy resins. Used for repairing, leveling and smoothing cement-based walls or floors that will be covered with epoxy coatings, polyurethane...
more...
EPOMAX-L20
Two-component epoxy injection resin for cracks 0.1-1.0 mm wide
Two-component, solvent-free epoxy injection resin. Used for repairing concrete cracks 0.1-1.0 mm wide by injection and for installing and anchoring reinforcing rods into existing concrete elements etc. Can be perfectly applied eve...
more...
EPOMAX-L10
Two-component epoxy injection resin for cracks 0.5-3.0 mm wide
Two-component, solvent-free epoxy injection resin. It is used for repairing concrete cracks 0.5-3.0 mm wide by injection and for installing and anchoring reinforcing rods into existing concrete elements etc. It can be perfectly ap...
more...
DUREBOND
Two-component epoxy injection resin for cracks > 3 mm wide – Bonding agent
Two-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as an injection resin mortar for repairing concrete cracks wider than 3,0 mm as well as for fixing and anchoring reinforcing rods ...
more...
NOZZLES FOR EPOXY RESIN INJECTIONS
For the injection of epoxy resins into structural elements
For the injection of EPOMAX-L10, EPOMAX-L20 and DUREBOND epoxy resins into structural elements.
more...
EPOMAX-ANCHOR
Fast-curing anchoring adhesive for reinforcing rods
Two-component, polyester-based, fast-curing anchoring adhesive, without solvent and styrene. Suitable as an anchoring adhesive for reinforcing bars, reinforcing rods, threaded rods etc.
more...
EPOMAX-LIQUID GLASS
Liquid glass for creating decorative surfaces
Two-component, transparent, solvent-free epoxy resin. Intended for use as a decorative coating for casting of objects in various substrates, such as wood, metal, stone, plastic, etc., creating a hard-wearing, glass-like final surf...
more...
PLASTIC SLEEVE FOR HOLLOW-BLOCKS
Plastic sleeve for anchoring reinforcing rods into hollow-blocks
Plastic sleeve that is used in combination with EPOMAX-ANCHOR for anchoring reinforcing rods into hollow blocks.
Type: KSH 12 x 50
Type: KSH 15 x 85
Type: KSH 15 x 130...
more...
KEEP IN
TOUCH
